Local Codes
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
State of Massachusetts: The installation must be made by a licensed plumber or gas fitter in the Commonwealth of Mas- sachusetts.
Sellers of unvented propane or natural
Product Features
Safety Pilot
This fireplace has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
Piezo Ignition System
This fireplace has a piezo ignitor. This system requires no matches, batteries or other sources to light fireplace.
Unpacking
1.Remove fireplace and hood from carton. Log is wrapped and inside fireplace. Do not remove at this time.
2.Remove all protective packaging applied to fireplace for shipment.
3.Make sure your fireplace includes one hardware packet.
4.Check fireplace for any shipping damage. If fireplace is damaged, call FMI PROD- UCTS, LLC at
Removing ceramic brick liners (If equipped)
WARNING: Ceramic brick liners are located behind upper louver and must be removed before lighting fireplace.
1.Remove screws from top louver and care- fully remove louver (see Figure 2).
2.Remove ceramic brick liners with protec- tive packaging. The brick liners will be installed later.
3.Remove yellow sticker from top of fire- box.
4.Replace top louver using screws removed in step 1.
Wrapped
Brick Liners
Top Louver
Screws
Figure 2 - Removing Brick Liners
www.fmiproducts.com | 5 |