Operation and maintenance Guidelines
Continued
damper Mechanism
The damper control lever is located inside the fire chamber (see Figure 32). Make sure lever is cool before handling. Pull down to close and push up to open. Damper must be open when lighting a fire. Not doing so will cause smoke spillage into the room. When fireplace is not in use, close damper to prevent down drafts to enter room.
ways open mechanism when starting a fire. This provides adequate outside combustion air. Close mechanism when not in use to prevent cold air from entering room. Periodically check your outside air intake vent hood for any possible obstructions such as snow, bushes, etc.
Grate
The grate is designed to provide you with the maximum solid fuel capacity. Do not overload
DAMPER CONTROL LEVER PULL DOWN TO CLOSE PUSH UP TO OPEN
GRATE
OUTSIDE AIR HANDLE PULL TO CLOSE PUSH TO OPEN
grate or obstruct required air space beneath it. Doing so may cause smoke spillage and a fire hazard.
WARNING: Risk of fire! Replace grate with FMI PRODUCTS, LLC model 11169 grate only. This grate has been designed to keep the operation of your fireplace safe and efficient.
Never obstruct flow of combustion and ventilation air. Keep front of fireplace clear of all obstacles and materials.
Chimney
Figure 32 - Damper Operation
Outside Air Mechanism
The outside air handle is located at the right hand side of fireplace rear refractory (see Figure 32). Pull to close, push to open. Al-
Have your chimney system cleaned and inspected regularly to ensure safe and efficient operation.
Technical Service
You may have further questions about instal- lation, operation, or troubleshooting. If so, contact FMI PRODUCTS, LLC at
You can also visit our web site at www.fmiproducts.com.
14 | www.fmiproducts.com |