www.fmiproducts.com 116646-01J36
SpECIFICaTIONSREplaCEMENT paRTS
Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
Contact authorized dealers of this product.
If they can’t supply original replacement
part(s), call FMI PRODUCTS, LLC at
1-866-328-4537.
When calling, have ready:
• your name
• your address
• model and serial numbers of your heater
• how heater was malfunctioning
• purchase date
Usually, we will ask you to return the part to
the factory.
SERVICE HINTS
When Gas pressure Is Too Low
• pilot will not stay lit
• burners will have delayed ignition
• replace will not produce specied heat
• propane/LP gas supply might be low (pro-
pane/LP units only)
You may feel your gas pressure is too low. If
so, contact your local gas supplier.
TECHNICal SERVICE
You may have further questions about
installation, operation, or troubleshooting.
If so, cont act FMI PROD UCTS, LL C a t
1-866-328-4537. When calling please have
your model and serial numbers of your
heater ready.
You can also visit FMI PRODUCTS, LLC’s
web site at www.fmiproducts.com.
(V)T32N-A Series, (V)T32N-A-HA Series,
CGDV32NR and CTDV32NR-HA
• Rating: 12,000/18,000 Btu/Hr
• Type Gas: Natural Gas Only
• Ignition: Piezo
• Manifold Pressure:
Models (V)T32N-A Series and CGDV32NR
3.5" W.C.
Models (V)T32N-A-HA series and
CTDV32NR-HA 3.8" W.C.
• Minimum Inlet Gas Pressure (W.C.): 5.5"
• Dimensions (H x W x D) (Firebox only. Does
not include nailing anges or standoffs):
32 1/4" x 34 1/2" x 16 5/8"
• Fireplace Weight*: 80 lb
• Shipping Weight*: 83 lb
*For refractory lined models add 45 lb
(V)T32P-A Series and CGDV32PR
• Rating: 11,000/17,000 Btu/Hr
• Type Gas: Propane/LP Gas Only
• Ignition: Piezo
• Manifold Pressure: 10" W.C.
• Minimum Inlet Gas Pressure (W.C.): 11"
• Dimensions (H x W x D) (Firebox only. Does
not include nailing anges or standoffs):
32 1/4" x 34 1/2" x 16 5/8"
• Fireplace Weight*: 80 lb
• Shipping Weight*: 83 lb
*For refractory lined models add 45 lb