3.12 - Focal amplifiers can be interlinked to facilitate upgrades to the Car Audio system. If you want to create
a system that uses several amplifiers, it is therefore possible to save time by not having to connect the source
audio cable (from the car radio) to the amplifier again. You simply need to use the “LINE OUT” output on the
first Focal amplifier you have installed and connect it to the “INPUT” connector on the new amplifier you are
installing. The line level signal from the source will be forwarded directly to the newly-installed amplifier. The
settings you have chosen for the first amplifier (GAIN, HI PASS, etc.) will not be duplicated to the line level
signal (RCA) – this means that your amplification system will always be 100% reconfigurable.
fig. 11
fig. 10
12
installation
notice amplis focal power gb.ind12 12notice amplis focal power gb.ind12 12 28/09/06 16:11:5928/09/06 16:11:59