FoodSaver V1095 Additional Features, Vacuum and Light Seal, Instant Seal Button, Cancel Button

QS.1095_v2 4/29/04 2:29 PM Page 4

Additional Features

Vacuum and Light Seal

Use this feature to reseal non-FoodSaver bags such as Mylar® potato chip bags to keep moisture out. A light seal is a shorter seal time to prevent melting or burning the bag.

1.Turn Seal Control Switch (G) to Vacuum and Light Seal.

2.Lift appliance lid and place one end of bag material across Sealing Strip (M), not over rubber gasket (L). Close lid.

3.Press down firmly on lid, hold 3-5 seconds, then release. Motor will continue to run.

4.When motor and Indicator Light (F) turn off, open lid and remove sealed bag.

Instant Seal Button

The Instant Seal Button (D) stops the vacuum process	1. Vacuum package as described in previous sections.
early and seals the bag, preventing fragile foods such		More
	2. To stop process before all air is removed, press and
as cookies from being crushed.	release Instant Seal Button. Vacuum process will
	stop within a few seconds and bag will be sealed.
	3. When light and motor turn off, open lid and
	remove bag.
Cancel Button
If fragile foods start to crush, you can stop the vacuum
process without sealing the bag. Press Cancel Button
(C) and motor will stop.
Antibacterial Drip Tray		And
The Antibacterial Drip Tray (K) is made with an
	Place Drip Tray into Vacuum Channel. Two bag
FDA-approved antibacterial ingredient that helps	guides in Drip Tray help correctly position FoodSaver
inhibit the growth of bacteria. The Drip Tray fits	Bags when vacuum packaging. Slip open end of bag
inside the Vacuum Channel (J) and is removable,	into guides before closing lid and vacuum packaging.
making cleanup easy when small amounts of liquids	After each use, empty Drip Tray and wash in warm
are inadvertently pulled into Vacuum Channel during	soapy water or place on top rack of dishwasher.
vacuum process. (See FoodSaver Reference Guide for	Appliance can be used without Drip Tray.
tips on preventing this.)