Fortec FS-4300 manual Limit Setup window Limit Setup Press, Local Longitude, Local Latitude Press

5.Limit Setup: Press OK key to pop up the

Limit Setup window.
Limit Setup: Press	keys to switch

among Disable Limit, East Limit and West Limit.

Limit Setup: Move cursor to the Limit Setup

button. You can press		key to turn west ,
or press	key to turn east.

Go to Reference: Press OK key to go to reference. If you select Disable Limit in the above Limit Setup item, this button will turn grey.

6.If select USALS, Delete All item will turn grey.

Local Longitude, Local Latitude: Press

keys to switch between West and

East, or press keys to switch between

North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9)to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90. If the inputted value is not in this range, system will pop up a dialogue "Out of Range" when exit from this window. You can press OK key to close this dialogue.

7.Motor Setting: Press OK key to enter into the Motor setting window.

Satellite, Transponder: Press keys to select satellite or transponder, or press OK key to pop up the drop-down list and select in the list.