Foster LC125 manual Contents, Introduction, Technical Information, Temperature Controller

Models: LC125

1 4
Download 4 pages 59.88 Kb
Page 2
Image 2
Contents

DISPOSAL REQUIREMENTS

If not disposed of properly all refrigerators have components that can be harmful to the environment. All old refrigerators must be disposed of by appropriately registered and licensed waste contractors, and in accordance with UK laws and regulations.

Contents

Page

Introduction

1

Technical Information

1

Temperature Controller

1

Controller Parameters

2

Alarms and Warnings

2

Electrical Connections

2

Wiring Diagram

3

Introduction

Top loading meatwell for the storage of frozen products

One piece foam shell with skin evaporator and bottom

mount condensing system. R 134A refrigerant

Fitted with corner bumpers to each side.

Front smash bar as an option, fitted as standard for Burger King.

Fitted with 4 x 60mm castors.

Technical Information

Temperature Set Point

-21°C

Refrigerant

R134A

Refrigerant Charge

180 gms

Capillary

4.5mts x 042

Power supply

230/50/1

Temperature Controller

When the controller is switched on a single line appears on the display for 3 seconds to indicate the autotest period.

After this period the air temperature measured by the T1 probe is displayed.

It is strongly advised that before adjusting any Service Parameters a thorough understanding of the following instructions should be obtained.

LDU 15 Controller

 

aux

 

lae

set

aux

Check temperature set point.

Check set point by pressing the

 

set

To increase set point press

 

 

 

 

 

set

 

+

To decrease set point press

 

 

 

+

 

set

 

 

Factory Temperature Set Point -21°C.

button

Exit from set up occurs after 10 seconds if no button is pressed.

Controller Set Up.

The parameters are accessed by pressing the following keys in succession

+

and keeping them pressed for 3 seconds.

 

Access to the parameters has been achieved with the first parameter SCL being displayed.

set

+

To pass from one parameter to the next press either the

or

To display the value press.

 

 

 

 

 

 

set

 

 

 

 

To change the value press

 

 

+

to increase, or

 

 

 

set

 

 

set

key.

+to decrease.

1

Page 2
Image 2
Foster LC125 manual Contents, Introduction, Technical Information, Temperature Controller, Controller Set Up