Fostex Speaker Back Panel Overview, XLR & TRS Combination Inputs, Woofer Gain, Phase Switch

Back Panel Overview

1. XLR & TRS Combination Inputs

These inputs is are electronically balanced inputs and are compatible with both -10dBV and +4dBusignals.

2. Woofer Gain

This control adjusts the Subwoofer level. Use the control to blend the low frequency seamlessly with the satellite speakers.

3. Phase Switch

This switch reverses the phase of the Subwoofer. Depending on the placement of the PM0.5-Sub MKⅡ relative to the satellite speakers in the room,

you may obtain the smoother frequency response if you set the switch to the negative position.

4. XLR Outputs

These outputs are electronically balanced outputs and supply +4dBu signal to the satellite speakers.

5. Power Switch

Turns the power to the PM0.5-Sub MKⅡ amplifier section on or off.

6. Standard IEC Power Input

This power connection should be used with a properly grounded three pin power cable.

7. Heatsink

The heatsink dissipates heat from the internal amplifier. It is important that the heatsink receives proper ventilation. Do not place the heatsink near any exernal sources of heat.

		7
		® PM0.4-Sub MKⅡ
			L
		INPUT
			R
		WOOFER	MAX
		GAIN
			MIN
		PHASE	+
			-
			L
		OUTPUT
			R
CAUTION:HEATSINK MAY GET HOT
CAUTION
RISK OF ELECTRIC SHOCK		CONFORMS TO
DO NOT OPEN	US UL STD.6500		POWER
AVIS. RISQUE DE CHOC ÉLECTRIQUE	3024002

NE PAS OUVRIR

WARNING To reduce the risk of fire or electrical Shock, do not expose this equl pment to rain or Moisture.Do not remove cover.No user serviceable parts inside.Refer servicing to quallfied personnal.

AC IN

MADE IN CHINA

1

2

3

4

5

6

p-5