Evolution ASP
E 2M hd asp
800 Aviation Parkway
Smyrna, TN USA 37167
Tel: 1 800 310 5710
Fax: 1 615 793 5940
email:
1” minimum clearance on sides and rear of machine
Cabinet
10” of clearance |
|
recommended |
|
above grinder |
|
(5” minimum) | 21/2” diameter hole |
| for utility lines |
35” | 22” |
high | |
| 118” - |
proprietary property of Franke Coffee Systems Americas, and shall not be reproduced in any form of media representative. Due to continuous product development, Franke Coffee Systems Americas reserves the right to make Evolution ASP Install guide• Under license of Franke Technology and Trademark, Ltd. Switzerland. Printed in U.S.A.
3/8” Braided stainless steel cold water supply
line
Water filter supplied with espresso machine
16mm (3/8”) Vented drain
Water and drain within 5’
Floor drain
Receptacle within 3’. Plug is included with machine.
All electrical and plumbing must meet local codes Please refer to specification sheets for your machine
Receptacle required
for espresso
L6-30R
© 2011 - Franke Coffee Systems Americas - This document is the confidential and without the expressed written permission of a Franke Coffee Systems Americas changes in design and specification without prior notice. REV 19Sep2011•G80005476FCG
Unit | Height | Width | Depth | Ship weight | Voltage/Phase/Cycle | Wattage | Amp Load | Amp Circuit | Plug | Water line | Water hardness Drain | |||
Espresso | 35” | 13” | 24” | 135 lbs | 4800 | 24 A | 30 A | NEMA | G 3/8” | 16mm ID | ||||
890mm | 320mm | 600mm | 61 kg | vented | ||||||||||
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
