Franklin ATH-440 manual Installing Batteries, Installing Cartridges

Installing Batteries Installing Cartridges

The BOOKMAN 440 model uses two CR2032, 3-volt batteries. Here is how to install or replace them.

Warning: When the batteries lose power or are removed from BOOK- MAN, information that you have en- tered in its built-in book as well as in any installed book cartridge will be erased.

1.Turn BOOKMAN over.

2.Slide off its battery cover in the direction of the triangle.

3.Install the batteries with their plus signs facing you.

4.Replace the battery cover.

➤Resuming Where You Left Off

You can turn off BOOKMAN at any time. When you turn BOOK- MAN on again, the screen that you last viewed appears.

Warning: Never install or remove a BOOKMAN cartridge when your BOOKMAN is on. If you do, informa- tion you have entered in the built-in book as well as in the cartridge will be erased.

1.Turn BOOKMAN off.

2.Turn BOOKMAN over.

3.Align the tabs of the cartridge with the notches in the slot.

4.Press the cartridge down until it snaps into place.

➤Removing Cartridges

Warning: When you remove a BOOKMAN cartridge to install an- other, information that you entered in the removed cartridge is erased.

4