Franklin BIB-1450 Using a Password, Warning

5.To delete all Databank entries, highlight Erase the List in the Databank Menu and then press ENTER.

Press Y to erase all Databank entries or N to cancel the deletion.

6.Press to return to the Bible.

Using a Password

You can use a password to prevent unauthorized access to the Databank. Warning! Always write the password in a safe, separate location. If you lose or forget the pass- word, you will be able to use the Databank again only by removing the batteries from your unit, which will permanently erase all the information stored in the Databank.

1.Press .

2.Touch DATA.

3.Highlight Set password and then press ENTER.

4.Type a password of up to eight characters and press ENTER.

Use to move the cursor to the left; use BACK to delete.

5.Press C to confirm or CLEAR to cancel the password.

The password you set will be requested the first time the Databank is used during a session.