Installing Book Cards | Selecting a Book |
1.Turn your product off.
2.Turn your product over.
3.Align the tabs on the book card with the notches in the slot.
4.Press the book card down until it snaps into place.
➤Removing Book Cards
Once a book card is installed in the product, you can select which book you want to use.
1.Turn your product on.
2.Press KARTE.
These are sample books.
3.Press 
or 
to highlight your selection.
Warning: Never install or remove a book card while your product is on. Any information that was entered in the builtin book or book card will be erased.
➤Book Card Troubleshooting
If your book card is performing errat- ically, follow the reset instructions for your platform. If this does not fix the problem, remove the book card and then remove the white rubber strip located between the two metal pins. Clean the rubber strip with your fin- gers and then replace it making sure it is completely in its notch.
For information on available Franklin BOOKMAN products, highlight the
BOOKMAN Info Icon, 
.
4.Press EINGABE to select it.
➤About Screen Illustrations
Some screen illustrations in this User’s Guide may differ slightly from what you see on screen. This does not mean that your product is mal- functioning. The examples in the
English half of this manual use
37English as the message language.