Sending Words Between Books Resetting BOOKMAN

This BOOKMAN book can send words to certain other BOOKMAN books.

To send a word, you must first install a book card in your BOOKMAN, and that book card must be able to receive words. To learn if a book card can send or receive words, read its User’s Guide.

Note: Speak English! can only receive International Phonetic Alphabet symbols from other BOOKMAN books.

1.Highlight a word in this book.

You can highlight a word on the Word List or use a highlighted word in the text.

2.Hold ✩ and press CARD .3.Highlight another book.

4.Press ENTER .

The word that you highlighted ap- pears in the other book.5.Press ENTER to look up the word, if needed.

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addi- tion, resetting BOOKMAN erases settings and information entered into its built-in book, and in an installed book card.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.2.Use a paper clip to gently press BOOKMAN’s reset button.The reset button is recessed in a pin- sized hole near BOOKMAN’s ON/OFF key.➤Troubleshooting BOOKMAN•Make sure your book card, if any, is installed correctly.•Check that the book card’s metal con- tacts are dirt- and dust-free.

This unit may change operating modes due to Electro-static Discharge. Normal operation of this unit can be re-established by pressing the reset key, ON/OFF , or by removing/replacing batteries.

15