Franklin R536 QSG technical specifications Battery Tips

Models: R536 QSG

1 10
Download 10 pages 8.28 Kb
Page 4
Image 4

Note

You must have a fully charged battery the first time you use the R536.

After the first use, you may use the device while it is connected to the A/C adapter.

When using battery power, the device lasts up to 3 hours (when connected to a single device only).

The battery will discharge at a faster rate as more devices are connected to it.

￿When charging your battery, keep it near room temperature.

￿Never expose batteries to temperatures below 32°F (0°C) or above 113°F (45°C). Never leave the device in an unattended vehicle due to uncontrollable temperatures that may be outside the recommended temperature range for this device.

￿It is normal for batteries to gradually weaken and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery.

2.2 Battery Tips

Warning

Use only Blink approved or Franklin Wireless approved batteries and chargers with your device.

Failure to use a Blink approved or Franklin Wireless approved battery and charger may increase the risk that your device will overheat, catch fire, and/or explode resulting in property damage, serious bodily injury, and/or death.

Battery life can vary based on the network, signal strength, temperature, features, and accessories you use.

￿If you connect your device to your computer using a USB data cable, the battery will charge.

￿It normally takes at least 3 hours to fully charge the battery with an A/C adapter.

￿New batteries or batteries stored for a long time may take more time to charge.

4

Ver.R536-TTQ01_EN

Page 4
Image 4
Franklin R536 QSG technical specifications Battery Tips