Getting Started

▼

To Install the Batteries

This unit uses 4 AAA batteries. You must insert the batteries before getting started. The batteries should be changed when the screen contrast is too light even after adjustment. Please have a small Phillips screwdriver at hand before you follow the steps below.

1.Turn the Spelling Ace over.2.Unscrew the back cover and slide it off in the indicated direction.3.Install the new batteries following the mark- ings in the compartment.4.Replace the back cover.

▼

To View a Demonstration

Unless disabled, a demonstration automatically appears when you turn on this unit.

1.Press ON/OFF.2.To stop the demonstration, press CLEAR.3.To disable the demonstration, type ✽✽d, and then press ENTER.4.To enable the demonstration, press CLEAR, type ✽✽d, and then pressENTER.

▼

To Adjust the Screen Contrast

1.Press CLEAR.2.Use or to lighten or darken the screen.

3