Changing the Battery

This product uses one CR2032, 3-volt lithium battery. The battery should be changed when the screen contrast is too light even after adjustment.

Before you replace the battery, you should have a new battery and a small Phillips screwdriver.

Warning! If the battery completely loses power, all the information stored in the phone list will be permanently lost. Furthermore, any time that you change the battery, you risk losing all your phone list information, so always keep written copies of your phone list information.

1.Using a Phillips screwdriver, unscrew and re- move the back cover.

2.Install a new battery, with its plus sign (+) facing you.

3.Replace the back cover.

Important Notes

1.Different types of batteries or new and used batteries are not to be mixed.

2.Only batteries of the same or equivalent type as recommended are to be used.

3.Batteries are to be inserted with the correct polarity.

4.Exhausted batteries should be removed.

5.The supply terminals are not to be short-circuited.

This unit may change operating modes due to electrostatic discharge. Normal operation of this unit can be reestablished by pressing ON/OFF .

FPS-28515-00

 

PN 7201607

Rev. B

18