5.After a puzzle is validated, press SOLVE to validate another puzzle or press START to exit the puzzle solver.

Solving a Puzzle

1.Follow steps 1-3 from “Validating a Puzzle” above.

2.Press START to start solving the puzzle you entered.

If the puzzle is not valid, the message “Err”

is displayed. Press , adjust the numbers, and then press START again to check the puzzle. Keep adjusting the values until you no longer see the “Err” message when you press START.

Depending how difficult the puzzle is, validating a puzzle may take a few minutes.

3.Solve the puzzle just as you would any

generated puzzle.

Hold for 3 seconds to exit solving the puzzle. The puzzle entry screen is displayed.

17