EN
3
11
Using the Drive
Chapter 3: Using the Drive How to Use the Discs
Attention! When using CD-ROM, CD-R, CD-RW, DVD R/RW or Blu-ray discs,
don’t attach any st ickers or label s to the d iscs. Us ing disc s with them
attached not only causes read and write errors , but data on the disc may
be lost due to damage to the disc its elf.
3.1 L oad the disc
1. Press the eject button.
2. Place the disc on the disc tray.
Note! When using a 8 cm CD/DVD, place it in the small round depression.
The face with t he label on it shou ld be up. Never place two discs in the
tray at the same time.
Be careful not to touch the recording surface of the disc.
3. Load the disc by pressing the eject button or by lightly pushing in the disc tray.
3.2 Disc ejectio n
1. Press the eject button.
2. Slowly take the disc out of the disc tray.
3. Press the eject button or push the dis c tray and the tray will be broug ht back into
the drive.
After ejecting the disc, return the tray inside the unit quickly. Wh en the tray is in the
ejected position, dust and other debris will enter, possibly causin g read errors, write
errors, or drive failure.