Freecom Technologies FX-50 manual Initial Operation Brief Description

Initial Operation - Brief Description

CHAPTER 1: Initial Operation - Brief Description

1.Plug in the connection cable to the FX-50.

2.Connectthepowercablesuppliedtothedesignatedpowerconnectoronthe Freecom drive.

3.Plug the power supply of the Freecom drive into the power outlet.

4.Connect the other end of the connection cable to the USB port/FireWire port on the PC.

5.To complete the rest of the installation procedure:

(only Windows 98:) AfteryouhaveconnectedtheFX-50,pleasestartwiththe driver installation, as described in chapter 2 on page 11.

(only MacOS 9.x:) Please install the Toast software, before connecting the FX-5toyourcomputer.Forfurtherinstructionsseechapter3.1(Installingthe Toast Software for Mac). Since MacOS 9.x supports only USB 1.1 your FX-50 will be recognised as a USB 1.1 device.

Under Windows ME / 2000 / XP and MacOS X a separate Freecom driver is not required. The drivers for Windows ME, Windows 2000 and Windows XP will be installed automatically by the operating system after plugging in the Freecom FX-50 into the USB or FireWire port of the computer.

(USB/FireWire version)

GB

1

7