Freedom9 80 user manual Overview, Safety Instructions, Package Contents

1 General Information

1.1Overview

The freeView Power 80 allows you to remotely control the AC power for up to eight devices including servers, routers, modems and telephone networks. With the ability to stack up to 16 units together, up to 128 devices can be controlled from a single interface.

The freeView Power 80 supports several methods to log in remotely. The main method is to access the unit via IP over the LAN or the internet. This method provides the user with a web- based interface that is fast and easy to use. An alternative is to connect a modem to the unit’s RS-232 port and access the device via dial-up modem. This method will also allow the user to control the unit using a web interface. The last method can be used if a computer is not available to access the freeView Power 80. Using the built-in telephone ports, the network administrator can access the device by dialing into it from a touch-tone telephone and control it using commands entered through the phone.

1.2Safety Instructions

If one of the following situations arises, the equipment should be checked by service personnel.

•The power cord is damaged.

•Liquid has leaked into the equipment.

•The equipment has been exposed to excessive moisture.

•The equipment does not work properly and you can not get it to work after reading this manual.

•The equipment has been dropped and damaged.

•The equipment shows obvious signs of damage.

1.3Package Contents

The complete freeView Power 80 package consists of:

•freeView Power 80 unit

•AC Power Cord

•RJ-11 Daisy Chain Cable

•Eight (8) RJ-11 to RS-232 Cables

•Screws and Mounting Brackets

•User Manual and Management Software CD

Ensure that the unit was not damaged during shipping. If you encounter a problem, please contact your dealer.

Read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the product and/or any of the devices connected to it.

2