Build the Platform
Build a Development Platform: Assemble Three Boards
18
i.MX31 PDK 1.4 Quick Start Guide
Connect Personality Board to Debug Board
The Personality board connects to the Debug board using a 500-pin connector. The
connector is keyed to avoid misconnection, so there is only one way to connect these
boards. Connect the Personality board to the Debug boar d. The maxi mum all owa ble angl e
for mating and unmating boards is 10 degrees . See Figure 3.2. For additional informati on,
see: http://samtec.com/ftppub/TESTRPT/tc076--1254reportrev3.pdf.
Figure 3.2 Install Personality Board onto Debug Board
Personality
Board
Debug
Board
Align boards
PersonalityBoard
Debug
Board
1
2Connect boards
Personality
Board
Debug
Board
3StackQS_WinCE.book Page 18 Sunday, September 28, 2008 1:58 PM