Freestyle 816 manual How To Operate Chronograph/Stopwatch, How To Set And Operate The Alarms

TIDE” appears. Future date will be displayed on the lower half, future tide graph and hourly time will be displayed on the upper half.

Press and hold LIGHT/SET button for two seconds; year digits will flash. To advance flashing year digits, press START button. Press MODE button; months digits will flash. To advance months digits, press START button. Press MODE button; date digits will flash. To advance date digits, press START button. When future date setting is complete, press LIGHT/SET button. Press START button; cursor will scroll across tide graph, indicating tide conditions for any hour of the day on the future date selected. Note: Hourly time is indicated beneath “FT” on the upper half of display.

HOW TO OPERATE CHRONOGRAPH/STOPWATCH

Press MODE button until “CHRONO” appears. “CHRONO RESET” will be displayed on the upper half; chronograph time on the lower half. Reset the chronograph to zero by pressing STOP/RESET button. Press START button to start chronograph.

Press START button to view split time. Split time is the time elapsed since the start of the chronograph. Chronograph will continue to count while split time is displayed. Each press of START button will display a split time.

To stop chronograph, press STOP/RESET button. Reset the chronograph to zero by pressing the STOP/RESET button.

HOW TO SET AND OPERATE THE ALARMS

Press MODE button until “ALARM” appears. There are four different alarms, which can be set as daily

repeating alarms, or one time only reminder alarms. To set a one time alarm, you must set a specific date. To set a daily repeating alarm, date position must be set to “-----”.

Additionally, the four different alarms may be set to reference either “TIME-1” or dual time “TIME-2.” Pressing STOP/RESET button will toggle between the four different alarms.

Press and hold LIGHT/SET button to enter alarm setting mode. The hours digits will flash. Press START button to advance the flashing hours digits; hold for rapid advance. Press MODE button; minutes digits will flash. Press START button to advance minutes digits. Press MODE button; months digits will flash; to set a one time only reminder alarm, you must set a date. Press START button to advance months digits. To set this alarm as a daily repeating alarm, enter (--) instead of specific months digits.

Press MODE button; date digits will flash. To set a one time only reminder alarm, press START button to advance date digits. To set this alarm as a daily repeating alarm, enter (--) instead of specific date digits. Press MODE button; “T1” or “T2” will flash. Press STOP/RESET button to indicate if this alarm is in reference to “TIME-1”, or dual time “TIME-2”. Press LIGHT/SET button when alarm 1 setting is complete. Press STOP/RESET button to advance to alarm 2, 3 or 4. To set any of these alarms, follow setting sequence for alarm 1 as detailed above.

Once any of the alarm times are set, the alarm is automatically activated (armed), and is indicated as “ ” on the display. To arm or disarm any of the four alarms while in alarm mode, press STOP/RESET button to select alarm. Once selected, press START button to arm or disarm the alarm “ ” and/or hourly chime “ ”. The setting sequence is:

Hourly chime on: “ ”

Alarm on: “ ”

Both alarm and

hourly chime on: “ ”

Both alarm and

hourly chime off: no symbol

HOW TO OPERATE THE

COUNTDOWN TIMER

Press MODE button until “TIMER” appears. During the setting process you can select from three different countdown timer functions. Countdown/stop (CS): timer counts down from a preset time to zero and stops. Countdown/repeat (CR): timer counts down from a preset time to zero, resets and repeats. Countdown/count up (CU): timer counts down from a preset time to zero and begins to count up.

Press and hold LIGHT/SET button to enter the countdown timer setting mode.

The seconds digits will flash. Press START button to advance seconds digits.

Press MODE button; hours digits will flash. Press START button to advance the hour digits.

Press MODE button; minutes digits will flash; press START button to advance minutes digits.

Press MODE button; CR, CS or CU will flash. Press START button to select which countdown timer you wish to use.

When countdown time setting is complete, press LIGHT/SET button to exit the setting mode. To start timer, press START button. To stop timer, press STOP/RESET button. To reset timer, press LIGHT/SET button.

HOW TO SET DUAL TIME

Press MODE button until “TIME-2” appears. To set dual time, press and hold LIGHT/SET button; seconds digits will flash. Press START button to reset the seconds digits to zero. Continue through the setting sequence as done in “TIME- 1”, setting by cycling between MODE button and START button. When dual time setting is complete, press LIGHT/SET button to exit the setting mode.

CARE AND MAINTENCE

1.Back case cover should only be removed by an authorized watch repair specialist.

2.Always rinse your watch in fresh water after immersion in salt or chlorinated water.

3.Do not expose watch or band to chemicals such as gasoline, aerosol sprays, paint or solvents.

4.Periodically clean with a soft cloth and fresh water.

NOTE: Extreme electrostatic discharge can cause the LCD to ‘freeze up’. In this event you could reset the watch by pressing all 4 buttons together for 5 seconds.

TIDE LOCATIONS

WEST USA SAN DIEGO,CA LA JOLLA, CA

SAN CLEMENTE, CA

NEWPORT BAY, CA CABRILLO BEACH, CA LOS ANGELES HARBOR, CA SANTA MONICA, CA MALIBU, CA

VENTURA, CA

RINCON, CA

SANTA BARBARA, CA GAVIOTA, CA POINT ARGUELLO, CA MORRO BEACH, CA CARMEL COVE, CA MONTEREY BAY, CA MOSS LANDING, CA SANTA CRUZ, CA OCEAN BEACH, CA