Friedrich 60 Hz manual Troubleshooting, Problem, Possible Cause, To Correct

Models: 60 Hz

1 16
Download 16 pages 10.77 Kb
Page 8
Image 8

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

TO CORRECT

 

Power disconnected.

Check power source.

 

System switch in “Off” position.

Set switch correctly.

 

Branch circuit fuse blown or

Replace fuse, reset breaker. If repeats, check fuse or breaker

UNIT DOES NOT RUN.

circuit breaker tripped.

size. Check for shorts in unit wiring and components.

Inoperative system switch.

Test for continuity.

 

 

Loose or disconnected wiring

Check wiring and connections.

 

at switch.

Connect per wiring diagram.

 

Inoperative switch (On-Off).

Test for continuity, 3 and 2, 5 and 6.

 

 

 

 

Dirty Filter.

Clean as recommended in Owner’s Manual.

 

Restricted air flow.

Check for dirty or obstructed coil - clean as required.

 

Inoperative thermostat.

Test for shorted thermostat or stuck contacts.

EVAPORATOR COIL

Short of refrigerant.

De-ice coil and check for leak.

FREEZES UP.

 

 

 

De-ice coil. Check temperature differential across coil. Touch

 

 

 

Partially restricted capillary.

test coil return bends for same temperature. Test for low

 

 

running current.

 

Inoperative fan motor.

Test and replace if inoperative.

 

 

 

 

Excessive heat load.

Test cooling performance of unit. Unit undersized.

 

Restriction in line.

Check for partially iced coil. Check temperature split across

COMPRESSOR RUNS

coil.

 

 

Check for presence of oil on silver soldered connections.

CONTINUALLY.

Refrigerant leak.

DOES NOT CYCLE OFF.

Check for partially iced coil. Check split across coil. Check for

 

low running amperage.

 

 

 

Thermostat contacts stuck.

Check operation of thermostat. Replace if contacts remain

 

closed.

 

 

 

 

 

 

Loss of charge in thermostat

Place jumper across thermostat terminals. If unit operates,

 

bulb.

replace thermostat.

THERMOSTAT DOES

Loose or broken parts in

Check as above.

NOT TURN UNIT ON.

thermostat.

 

 

Incorrect wiring.

Connect per wiring diagram.

 

System switch open.

Test for continuity at switch terminals 2 and 3.

 

 

 

 

Thermostat set at coldest point

Turn to highest temperature setting to see of unit will cycle off.

THERMOSTAT DOES

Thermostat contacts stuck.

Disconnect power to the unit. Remove cover of thermostat

and check if contact is stuck, if so replace thermostat.

NOT TURN UNIT OFF.

 

Switch (On - Off) shorted.

Test switch for open contacts at terminals 2 and 3 with switch

 

 

in “Off” position.

 

 

8

Page 8
Image 8
Friedrich 60 Hz manual Troubleshooting, Problem, Possible Cause, To Correct