1.3 LOCATIONS OF CONTROLS
1
2
3
4
6
Power
Temp
5
5
1TEMPERATURE SETTING
•These buttons control the temperature of the room.
The temperature can be set within a range of 60° F to 86° F, in increments of 1° F.
2MONEY SAVER
The fan stops when the compressor stops cooling.
•Approximately every 3 minutes the fan will turn on and sample the room air to determine if more cooling is needed.
3OPERATION MODE SELECTOR
•Everytime you push this button, it will rotate between the COOL, FAN and DRY modes.
4ON/OFF TIMER
come on in 1 to 12 hours from its previous setting. Each touch will increase the timer by 1 hour.
turn off in 1 to 12 hours. Each touch will increase the timer by 1 hour. After the timer has been on for 30 minutes, the temperature will automatically rise 2° F, and after another 30 minutes, it will automatically rise 2° F again. The temperature will then stay the same until the timer goes OFF.
To cancel the timer, press the TIMER pad until the display time disappears.
Fan Speed
Timer Mode
4
Money
Saver
2
1
6
3
5POWER
•To turn the unit ON, push the button. To turn the unit OFF, push the button again.
•This button takes priority over any other buttons.
•When you first turn it on, the unit is on the High cool mode and the temp. at 72° F
6FAN SPEED
•Everytime you push this button it will rotate between the following fan speeds: High (F3) → Low(F1) → Medium (F2) → High (F3)