Model PDXRC

Operating Instructions

HAND HELD REMOTE CONTROL

For Use With Packaged Terminal Units

Please read these instructions completely before attempting installation.

NOTE: This kit is for use with PD model Friedrich PTAC units with SD or later suffixes. For example: PDE09K3SD . This kit will not work with prior models.

This kit contains

Qty

1.

Installation instructions

1

2.

Remote control

1

3. AAA batteries

2

4.

Fill piece

1

5. Screws #8 x 3/8

2

Preparing unit for remote control use

NOTE: The remote control operation requires the control panel door of the PTAC to remain open or be removed from the unit. If electing to use the fill piece, follow Steps 1-4. Otherwise, proceed straight to Step 5.

1) Remove the control panel door from the front grille by unhinging it from the grille. This is done by pushing back on the top portion of the door until the door is released from the hinges.

2)Remove the front grille from the unit.

3) Screw the fill piece to the unit using the screws provid- ed into the two screw holes above the control panel.

4) Reattach the front grille.

5)Turn on the PTAC unit

6)Put batteries in the remote

7)The remote control is now ready for operation.

8)Your unit should come already enabled to receive the remote signal. If after all the steps are done and your unit does not respond to remote signal, hold the temp and the temp buttons simultaneously for three seconds, or until the display window shows "E" to enable the remote.

PDXRC

Remote

Control

Temperature

Cooler Warmer

Remote Control Operation

POWER - Press the Power button once. The unit will automat- ically turn on in the mode and fan speed it was last left on.

To set mode of operation

COOL - Press the Cool button to automatically switch the operating mode to COOL.

HEAT - Press the Heat button to automatically switch the operating mode to Heat.

FAN ONLY - Press the Fan Only button if you want to run the fan only.

COOLER - Press the Cooler button to raise the tempera- ture setting one degree.

WARMER - Press the Warmer button to lower the tem- perature setting one degree.

To adjust fan speed

Low Fan - Press the Low Fan button to adjust the fan speed to low.

High Fan - Press the High Fan button to adjust the fan speed to high.

Fill Piece Installation

Cool

Power

Heat

Low

Fan

High

Fan

Only

Fan

920-172-00 (2-08)

Page 1
Image 1
Friedrich PDXRC operating instructions Operating Instructions, Hand Held Remote Control, Remote Control Operation

PDXRC specifications

Friedrich PDXRC is an advanced air conditioning unit that epitomizes reliable climate control for residential and commercial spaces. Designed by Friedrich, a company with a strong legacy in creating high-performing HVAC solutions, the PDXRC series incorporates innovative technologies that enhance energy efficiency, comfort, and user convenience.

One of the standout features of the Friedrich PDXRC is its advanced inverter technology. This system allows the unit to adjust its cooling output dynamically, ensuring it operates at optimal efficiency. By continuously adjusting the compressor speed, the PDXRC consumes less energy while maintaining consistent room temperatures, resulting in lower utility bills and a reduced carbon footprint.

The PDXRC is equipped with a multi-stage filtration system, ensuring that the air quality remains top-notch. This filtration mechanism captures dust, allergens, and other pollutants, contributing to a healthier indoor environment. Additionally, it features a washable filter, which simplifies maintenance and prolongs the lifespan of the unit.

User control is another significant aspect of the Friedrich PDXRC. With intuitive digital controls and wireless remote operation, users can easily set their preferred temperature and fan speed, as well as program the operation on a schedule. Some models even offer smart technology compatibility, enabling control via smartphone apps and integration with home automation systems.

Another notable characteristic of the Friedrich PDXRC is its durability and quiet operation. Built with high-quality components, the unit is constructed to withstand various environmental conditions, ensuring longevity. Furthermore, the operation of the PDXRC is remarkably quiet, which enhances comfort without disturbing the peaceful ambiance of living or working spaces.

In terms of installation, the Friedrich PDXRC offers versatility with various mounting options. Whether for window installation or as a through-the-wall unit, the design accommodates different architectural needs.

Overall, the Friedrich PDXRC combines efficiency, advanced technology, and user-centric features, making it an excellent choice for anyone looking to enhance their indoor climate control experience. Whether for home use or commercial applications, the PDXRC series stands out for its performance and reliability, adhering to modern standards of indoor comfort.