Congratulations |
|
Your QuietMaster unit is designed for cooling medium to large areas in both residential and commercial applications. |
|
The unit is simple to operate and provides maximum efficiency and quiet operation. |
|
Table of Contents |
|
Before Operating Your Unit | 2 |
To Start Unit | 4 |
Function Control | 4 |
Temperature Control | 4 |
MoneySaver® Feature | 4 |
To Remove Filter | 5 |
Fresh Air and Exhaust Control | 5 |
Troubleshooting Tips | 6 |
Warranty | 7 |
WARNING! Before operating your unit |
|
Make sure the wiring is adequate for your unit.
If you have fuses, they should be of the time delay type. Before you install or relocate this unit, be sure that the amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Figure 1.
DO NOT use an extension cord.
The cord provided will carry the proper amount of electrical power to the unit. An extension cord will not.
Make sure that the receptacle is compatible with the air conditioner cord plug provided.
This insures proper grounding. If you have a two prong receptacle you will need to have the circuit replaced by
acertified electrician with a grounded circuit that meets all national and local codes and ordinances. Under no circumstances should you remove the ground prong from the plug. You must use the three prong plug furnished with the air conditioner.
2
