INSTALLATION REQUIREMENTS

Exhaust system requirements, continued

WARNING

FIRE HAZARD

A clothes dryer must be exhausted outdoors. Do not exhaust dryer into a chimney, a wall, a ceiling, an attic, a crawl space or any concealed space of a building. A clothes dryer produces combustible lint. If the dryer is not exhausted outdoors, some fine lint will be expelled into the laundry area. An accumulation of lint in any area of the home can create a health and fire hazard.

The dryer must be connected to an exhaust outdoors. Regularly inspect the outdoor exhaust opening and remove any accumulation of lint around the outdoor exhaust opening and in the surrounding area.

WARNING

FIRE HAZARD

•Do not allow combustible materials (for example: clothing, draperies/curtains, paper) to come in contact with exhaust system. The dryer MUST NOT be exhausted into a chimney, a wall, a ceiling,

or any concealed space of a building which can accumulate lint, resulting in a fire hazard.

•Do not screen the exhaust ends of the vent system, or use any screws, rivets or other fasteners that extend into the duct to assemble the exhaust system. Lint can become caught in the screen, on the screws or rivets, clogging the duct work and creating a fire hazard as well as increasing drying times. Use an approved vent hood to terminate the duct outdoors, and seal all joints with duct tape. All male duct pipe fittings MUST be installed downstream with the flow of air.

WARNING

FIRE HAZARD

Exceeding the length of duct pipe or number of elbows allowed in the “MAXIMUM LENGTH” charts can cause an accumulation of lint in the exhaust system. Plugging the system could create a fire hazard, as well as increase drying times.

 

 

 

MAXIMUM LENGTH

 

Number

 

of 4” (10.2cm) Rigid Metal Duct

 

 

VENT HOOD TYPE

 

 

(Preferred)

 

of 90°

 

 

 

 

turns

4”

 

 

2.5”

 

 

 

 

(10.2cm)

louvered

(6.35cm)

0

 

64 ft. (19.5 m)

48 ft. (14.6 m)

1

 

52 ft. (15.9 m)

40 ft. (12.2 m)

2

 

44 ft. (13.5 m)

32 ft. (9.8 m)

3

 

32 ft. (9.8 m)

24 ft. (7.3 m)

4

 

28 ft. (9.5 m)

16 ft. (4.9 m)

WARNING

FIRE HAZARD

•Do not install flexible plastic or flexible foil venting material.

•If installing semi-rigid venting, do not exceed 8 ft. (2.4 m) duct length.

7

Page 6 Page 8
Page 7
Image 7
Frigidaire 137112200B important safety instructions Maximum Length
Page 6 Page 8

137112200B specifications

The Frigidaire 137112200B is an innovative and reliable component designed specifically for use in various refrigerator models. This part is a crucial element in maintaining optimal performance and longevity of your refrigerator, ensuring that your food and beverages stay fresh for extended periods.

One of the standout features of the Frigidaire 137112200B is its compatibility with numerous Frigidaire refrigerator models, making it a versatile replacement option for those needing to service their appliances. Built to high standards, it features durable construction that can withstand the challenges of regular usage. This robustness not only enhances the part's lifespan but also ensures consistent performance over time.

The Frigidaire 137112200B is designed with advanced technologies that promote energy efficiency. It operates seamlessly to maintain the right temperatures inside the refrigerator, which not only contributes to food preservation but also supports lower energy consumption. This can lead to long-term savings on electricity bills, which is an important factor for many consumers.

Installation of the Frigidaire 137112200B is straightforward, making it accessible for those who prefer a do-it-yourself approach to appliance repair. The part can typically be replaced with basic tools, allowing users to restore their refrigerator's functionality without the need for professional assistance. Comprehensive instructions often accompany the product, aiding even the less experienced homeowner.

Another key characteristic of the 137112200B is its role in maintaining optimal airflow within the refrigerator. Proper airflow is essential for the even distribution of cool air, which helps to prevent hot spots and ensures that all areas of the refrigerator remain at a consistent temperature. This feature not only enhances food preservation but also reduces the risk of spoilage.

In conclusion, the Frigidaire 137112200B is an essential component for Frigidaire refrigerators, known for its compatibility, durability, and energy efficiency. Its advanced design facilitates proper temperature regulation and airflow, making it a reliable choice for maintaining freshness and prolonging the life of your refrigerator. Whether you're performing routine maintenance or undertaking a necessary repair, this part exemplifies quality and innovation, reflecting Frigidaire's commitment to excellence in home appliances.
Top Page Image Contents