Gas connection

1.Remove the shipping cap from gas pipe at the rear of the dryer.

DO NOT connect the dryer to L.P. gas service without converting the gas valve. An L.P. conversion kit must be installed by a qualified gas technician.

2.Connect a 1/2 inch (1.27 cm) I.D. semi-rigid or approved pipe from gas supply line to the 3/8 inch (0.96 cm) pipe located on the back of the dryer. Use a 1/2 inch to 3/8 inch (1.27 cm to 0.96 cm) reducer for the connection. Apply an approved thread sealer that is resistant to the corrosive action of liquefied gases on all pipe connections.

Manual

Flare

GAS FLOW

Shutoff

Flare

Union

Union

 

Valve

 

 

 

 

 

 

 

 

 

 

 

 

 

Closed

Nipple

Flexible

Inlet Pipe on

Open

Connector

Back of Dryer

All connections must be wrench-tightened

The supply line must be equipped with an ap- proved manual shutoff valve. This valve should be located in the same room as the dryer and should be in a location that allows ease of opening and closing. Do not block access to the gas shutoff valve.

3.Open the shutoff valve in the gas supply line to allow gas to flow through the pipe. Wait a few minutes for gas to move through the gas line.

to dryer

from

gas

supply

 

 

 

Shutoff Valve -

Open position

4.Check for gas system leaks with a manometer. If a manometer is not available, test all connections by brushing on a soapy water solution.

- EXPLOSION HAZARD - NEVER test for gas leaks with an open flame.

Electrical connection (non-Canada) 3-wire cord

- ELECTRICAL SHOCK HAZARD - Failure to disconnect power source before servicing could result in personal injury or even death.

1.Turn off power supply to outlet.

2.Remove the screw securing the terminal block access cover in the upper corner on the back of the dryer.

3.Install a UL-approved strain relief according to the power cord/ strain relief manufacturer’s instructions in the power cord entry hole below the access panel. At this time, the strain relief should be loosely in place.

4.Thread an UNPLUGGED, UL-approved, 30 amp. power cord, NEMA 10-30 type SRDT, through the strain relief.

5.Attach the power cord neutral (center wire) conductor to the SILVER colored center terminal on the terminal block. Tighten the screw securely.

6.Attach the remaining two power cord outer conductors to the outer, BRASS colored terminals on the terminal block. Tighten both screws securely.

- ELECTRICAL SHOCK HAZARD - Do not make a sharp bend or crimp wiring/conductor at connections.

3-wire

30 AMP

 

NEMA 10-30

Neutral

receptacle

 

(center wire)

(NEMA type

 

 

10-30R)

 

 

 

 

Neutral

 

 

terminal

DO NOT remove

internal ground in a

3-wire system!

7.Follow manufacturer’s guidelines for firmly securing the strain relief and power cord.

8.Reinstall the terminal block cover.

If moving dryer from a 4-wire system and installing it in a 3-wire system, move the internal ground from the center terminal back to the GREEN screw next to the terminal block.

10

Page 10
Image 10
Frigidaire 137153400A installation instructions Gas connection, Wire, 10-30R

137153400A specifications

The Frigidaire 137153400A is a highly functional part designed for a range of Frigidaire washing machines, catering to diverse household laundry needs. This part is an essential component that contributes to the seamless operation of washing appliances, ensuring user satisfaction through durability and efficient performance.

One of the main features of the Frigidaire 137153400A is its robust design that includes high-quality materials. This durability ensures that it withstands regular usage, thus minimizing the need for frequent replacements. The precise engineering of the part guarantees that it fits perfectly into compatible washing machine models, which streamlines the installation process and helps maintain optimal washing results.

In terms of technology, this component excels in enhancing the overall efficiency of washing machines. Its role is crucial in regulating water flow and performing necessary operations that enhance water drainage and cycle completion. This functionality not only improves washing performance but also reduces water waste, aligning with modern environmental standards.

Another characteristic of the Frigidaire 137153400A is its compatibility with a variety of Frigidaire washing machine models. This versatility makes it a valuable addition for homeowners who may want to upgrade or replace parts in their existing appliances without downgrading performance. Homeowners can benefit from the cost savings associated with keeping their current washing machines in optimal working condition rather than investing in new units.

In summary, the Frigidaire 137153400A is a well-engineered component that offers a blend of durability, efficiency, and compatibility with Frigidaire washing machines. Its design not only supports improved washing performance but also minimizes environmental impact through better water management. For those seeking to maintain their appliances effectively, this part stands as an indispensable choice that underscores Frigidaire's commitment to quality and technological advancement in household appliances. Investing in components like the Frigidaire 137153400A ensures that laundry tasks can be completed with ease and reliability, meeting the demands of a modern household.