5
Turn cycle selector clockwise to desired cycle and setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of load
and fabric type. Room temperature and humidity, type of
installation and electrical voltage or gas pressure can also
affect drying time.
AUTO DRY CASUAL
This cycle is best for permanent press items. Drying time is
determined automatically at the temperature selection of
your choice.
Casual medium heat• is suggested for permanent press
items.
Initially set cycle selector on • normal dry.
For items requiring more drying time, set cycle selector •
on more dry.
For items requiring less drying time, set cycle selector on • less dry.
A signal will sound toward the end of the cool down •
period when the end of cycle chime is turned on.
If the • wrinkle release option is turned to yes, the cycle
selector will advance to the wrinkle release setting.
Unheated tumbling continues during wrinkle release
for 16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound briefl y
every fi ve minutes as a reminder to remove the load
when the end of cycle chime is turned on.
AUTO DRY WHITES
This cycle is best for cotton items. Drying time is determined
automatically at the temperature selection of your choice.
Whites high heat• is suggested for cotton items.
Initially set cycle selector on • normal dry.
For items requiring more drying time, set cycle selector •
on more dry.
For items requiring less drying time, set cycle selector on • less dry.
AUTO DRY DELICATES
This cycle is best for knit and delicate items. Drying time is
determined automatically at the temperature selection of
Cycle SelectionTemperature SelectionEnergy Saving TipsOperating Instructions
your choice.
Delicates low heat• is suggested for knit and delicate items.
Initially set cycle selector on • normal dry.
For items requiring more drying time, set cycle selector •
on more dry.
For items requiring less drying time, set cycle selector on • less dry.
If the • wrinkle release option is turned to yes, the cycle
selector will advance to the wrinkle release setting.
Unheated tumbling continues during wrinkle release
for 16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound briefl y
every fi ve minutes as a reminder to remove the load
when the end of cycle chime is turned on.
TIMED DRY
This cycle provides approximately 60 minutes of drying time
at the temperature selection of your choice.
Follow the fabric care label
instructions on items to be
dried.

For best results

- FIRE HAZARD - To avoid fi re hazard, do not
use heat to dry items containing feathers or down, foam rub-
ber, plastics, or similarly textured, rubber-like materials. Use
the Timed Dry cycle and the Air Fluff/No Heat setting.
Always follow directions on fabric care labels.
The whites-high heat, casual-medium heat, and
delicates-low heat temperature settings may be used
with any cycle setting. The air fl uff-no heat setting can be
used only in the Timed Dry cycle. Air fl uff-no heat setting
tumbles the load without heat. Use air fl uff to freshen
clothing, pillows or blankets, or to dust draperies.
Keep the lint screen clean and exhaust the dryer correctly.•
Sort laundry properly and select proper temperature and •
cycle settings. Choose an automatic dry cycle whenever
possible for accurate drying time.
Dry only full loads. Single items and small loads usually take •
longer to dry.
Avoid overloading, adding wet items to a partially dry load, •
and overdrying.
Dry one load after another to take advantage of a warm dryer.•
Opening the door needlessly causes warm air to escape, •
which prolongs drying time.
If possible, use the dryer on low humidity days.•
Install the dryer in an area where the room temperature is •
at least 45°F (7°C).