Frigidaire 200 Operating Instructions, Very Important Information-Read Before, Getting Started

Operating Instructions

Vent Latch

Appearance may vary from your model.

Very Important

Information—Read Before

Operating Your Dishwasher!

Normal Operating

Sounds

This dishwasher does not sound like most dishwashers—IT’S QUIETER.

Your Precision Wash System® dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may–or may not– hear the drain motor.

The next sound you will hear is the splashing water as it enters the tub. Then the lower arm rotates and circulates water. This is followed by a pause and a slightly different sound as the middle arm sprays water. If you listen closely, you will hear the change in sound as the wash action switches from one arm to the other.

PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON’T hear!

Getting Started

1.Load dishwasher (See Preparing and Loading Dishes).

2.Add detergent (See Dishwasher Dispenser & Detergents).

3.Add rinse aid, if needed (See Rinse Aid).

4.Turn dial clockwise to select cycle (See Cycle Chart) or number of hours for delay start.

5.Select desired energy OPTIONS (See Energy Options). The indicator will show red when selected.

6.If using DELAY START, see "Delay Start."

7.For instructions on connecting the portable dishwasher, see “Connecting and Disconnecting the Portable/Convertible Dishwasher.”

8.Run hot water faucet nearest dishwasher until water is hot. Turn water off.

9.To start, close door to latch.

Delay Start (available select models)

Allows you to delay starting the POTS & PANS cycle.

•Turn dial to select number of hours.

•Select HI-TEMP WASH ON option and other desired options.

•Close door to latch. The DELAY START light (available select models) will come on.

Plate Warmer (available select models)

For warming dishes and serving plates before serving hot foods:

•Load clean plates and dishes to be warmed.

•Turn dial to PLATE WARMER.

•Select HEAT DRY ON option.

4