Frigidaire 2020211a1446 Installation, Removing the air conditioner From Window

Installation

7RVHFXUHORZHUVDVKLQSODFHDWWDFKULJKWDQJOHVDVKORFNZLWKƎPPVFUHZDVVKRZQ),* NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself.

Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11).

FIG. 10 FIG. 11

FOAM SEAL

After the completion of the installation, please check the machine’s lean as shown (FIG. 12A & FIG. 12B). It’s necessary for proper condensed water utilization and drainage.

FIG. 12A FIG. 12B

	H						H
INSIDE			OUTSIDE		INSIDE				OUTSIDE
			Bottom Rail			H=H1-H2 DERXWƎaƎ
H										Bottom Rail
				H1			H2
about
ƎaƎ
		Wooden Window
								Vinyl-Clad Window

Trim the weather seal Ǝ;Ǝ;Ǝ with a proper length,

peel off the protective backing and plug any gaps if needed),* DVVKRZQ),*

Removing the air conditioner From Window

Turn the air conditioner off, and disconnect power cord.

Remove sash seal from between windows, and unscrew sash lock. Remove screws installed through frame and framelock.

Close (slide) side panels into frame.

Keeping a firm grip on air conditioner, raise sash and carefully remove.

Be careful not to spill any condensate water while lifting unit from window. Store parts WITH air conditioner.

4