Operating Instructions
Operating Instructions
(continued)
3.After a few days when the Relative Humidity has declined, press the HUMIDITY 
or 
buttons to choose a value between 35% to 85%, so the room is kept at a comfortable humidity. Pressing the 
or 
buttons will change the humidity selection in 5% increments. After you have set the desired humidity, the readout will display the actual
room humidity. If at any time you want to return to the CONTINUOUS Mode, pressing the HUMIDITY | button |
will lower the Relative Humidity through the 5% increments until the display reads CO. |
|
4.You can also use the FAN SPEED button to change the fan speed to HIGH or LOW. The indicator light will show the setting you have selected. A higher fan speed will result in quicker moisture removal.
5.The CLEAN FILTER light will illuminate after 250 hours of operation. At this time refer to the care and cleaning section to remove and clean the filter. Once the filter has been cleaned and replaced, simply press the FILTER button to extinguish the light.
2009 Electrolux Home Products, Inc. | All rights reserved. | 5 | |
|
|
| |
|
|
| |
