Frigidaire 220219A255 Air Conditioner Features, continued, Sleep Feature, You Will See, LIGHT On

3SGI$0

&

0

<

&0

0<

&<

&0<

.

Air Conditioner Features

(continued)

SLEEP FEATURE: YOU WILL SEE:

LIGHT On

DO THIS:

PRESS SLEEP

BUTTON

The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this “MODE” the selected temperature will increase by 2 degrees F, 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new tem- perature will be maintained for 7 hours before it returns to the originally selected temperature. If this Mode is selected with Heat, the set tem- perature will decrease at the same time pattern. This ends the “Sleep” MODE and the unit will continue to operate as originally program- med. The “Sleep” MODE program can be cancelled at any time during operation by again pressing the “Sleep” button.

CHECK FILTER FEATURE: YOU WILL SEE:

LIGHT On

DO THIS:

AFTER CLEANING

PRESS TO RESET

Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the “Check Filter” button and the light will go off.

CLEAN AIR FEATURE (on some models): YOU WILL SEE: LIGHT On

DO THIS:

PRESS

CLEAN AIR

BUTTON

Note: When this feature is “ON”, the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this feature, press the Clean Air button (the LIGHT will turn off).

9