First Steps, Installation, Leveling | Frigidaire 241846000 specs

FIRST STEPS

This Owner’s Guide provides specific operating instructions for your model. Use the refrigerator only as instructed in this Owner’s Guide. Before starting the wine cooler, follow these important first steps.

INSTALLATION

•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

•For optimal performance, it is recommended that you install the wine cooler where the ambient temperature is between 70 and 78 degrees fahrenheit.

•Allow space around the unit for good air circulation. Leave a 2 inch space on the back and sides of the wine cooler for adequate circulation.

•Be sure the wine cooler stays in the upright position during transport.

•Keep the wine cooler from any hazardous or combustible agents.

NOTE: The exterior walls of the wine cooler may become quite warm as the compressor works to transfer heat from the inside. Temperatures as much as 30° F warmer than room temperature can be expected. For this reason it is particularly important in hotter climates to allow enough space for air circulation around your wine cooler.

LEVELING

The wine cooler must have all bottom corners resting firmly on solid floor. The floor must be strong enough to support a fully loaded wine cooler. NOTE: It is Very Important for your wine cooler to be level in order to function properly. If the wine cooler is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost, or moisture problems.

To LevelYour Wine Cooler:

After removing all interior and exterior packaging materials, use a carpenter’s level to level the wine cooler from front-to- back. Adjust the leveling legs in front, ½ bubble higher, so that the door closes easily when left halfway open.

CLEANING

•Wash any removable parts of the wine cooler interior, and exterior with mild detergent and warm water. Wipe dry. Do not use harsh cleaners on these surfaces.

•Do not use razor blades or other sharp instruments, which can scratch the appliance surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild deter- gent, or touch the residue with the sticky side of tape already removed. Do not remove the serial plate.

Important Safeguards: Do not store food in your wine
cooler as interior temperature may not get cool enough to
prevent spoilage. In summer months or areas of high
humidity, the glass door may build up moisture. To
remove the moisture, wipe it away.	3

REVERSING THE DOOR SWING

The wine cooler glass door can be opened from left to right and vice versa. Should you desire to change the opening direction, please follow these instructions.

NOTE: All parts removed must be saved to do the reinstallation of the door.

1.Remove the two screws (1) that hold the lower hinge (2)(right side) to the frame. Also remove the screw-type leveling front leg (3).

2.Remove the left front leg (4) and transfer it to the right side.

3.Lift the door and place it on a padded surface to prevent scratching it. Make sure to remove the spring (5) located inside the upper right hole of the door, and the upper right side pin (6).

4.Remove the plug button (7) from the upper left hole of the door and transfer it to the uncovered hole on the right side. Be sure to press the button firmly into the hole.

5.Insert the upper pin (6), previously removed from the right side in step 3, and transfer it to the hole on the left side of the top frame.

6.Insert the spring (5), previously removed from step 3,inside the upper left side hole of the door.

7.Set the door in its place making sure the pin (6) enters the bushing at the lower upper frame section (hole).

8.While holding the door in the closed position, secure the left hinge (2) previously removed in step 1.

9.Insert the 2 screws (1) previously removed in step 1 and tighten them.

	6				7
	5			6	7
	5			6
	7			5
	2			2
1	3		1	3
4		4
FIGURE 1			FIGURE 2
Position prior to door reversal		Position prior to door reversal
1	Door Hinge Screws
2	Lower Door Hinge
3	Front Leveling Legs
4	Left Front Leg
5	Door Frame Spring
6	Door Frame Pin
7	Hinge Plug (Door Frame)		Left Side

241846000 specifications

The Frigidaire 241846000 is a noteworthy refrigerator water filter designed to ensure a cleaner and tastier water supply for households. As a replacement component for various refrigerator models, this filter has become an essential part of many kitchens, contributing to a better quality of life for users.

One of the main features of the Frigidaire 241846000 is its advanced filtration technology. It utilizes a activated carbon filter system, which effectively reduces common contaminants such as chlorine, lead, and other heavy metals, thereby improving the taste and smell of drinking water. The filter is designed to maintain a flow rate that allows for efficient water production without sacrificing purity.

Another characteristic of the Frigidaire 241846000 is its user-friendly installation process. The filter is designed to fit seamlessly into the refrigerator's water filter compartment, making it easy for homeowners to replace their old filter without the need for professional assistance. This ease of use is a significant benefit, as it encourages regular filter changes, which is vital for maintaining optimal water quality.

The capacity of the Frigidaire 241846000 is also impressive. The filter can typically last for up to six months or can filter approximately 200 gallons of water, depending on water quality and usage. This longevity means fewer replacements and a more convenient experience for users.

In addition to its practical features, the Frigidaire 241846000 is also engineered to comply with industry standards. It is certified by the NSF International, which ensures that it meets strict guidelines for contaminant reduction. This certification provides peace of mind to consumers who prioritize water safety and hygiene.

Moreover, eco-conscious consumers will appreciate that the Frigidaire 241846000 is designed with sustainability in mind. The materials used in its construction are often recyclable, which helps reduce waste and environmental impact.

Overall, the Frigidaire 241846000 water filter stands out for its combination of excellent filtration capabilities, ease of installation, and durability. Its ability to provide cleaner, fresher water makes it a valuable investment for any household, contributing to healthier living while being easy to maintain. For families looking to enhance their kitchen's water supply quality, the Frigidaire 241846000 water filter is a reliable and efficient choice.

Frigidaire 241846000 First Steps, Installation, Leveling, Cleaning, Reversing the Door Swing

Models: 241846000