Door Removal Instructions
CAUTION
Wear gloves and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles.
Additionally, before installing the door handles, make sure the door swing is correct. Your model will have either a right hand or left hand door swing. Follow instructions in the Use & Care Guide to reverse the doors, if necessary.
To attach refrigerator handle:
1Place rounded part of handle onto shoulder screw on face of door and align the two (2) holes in top of handle with the two (2) holes in top of door. Do not tighten the set screw yet.
2Install the two (2) screws into the top of the handle.
3Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
3Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
To reverse refrigerator/freezer handles:
Handles may be easier to reverse while doors are off. Reverse freezer and refrigerator handles as shown.
CAUTION
Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.
To attach freezer handle:
1 Place rounded part of handle onto shoulder screw on face of door and align the two (2) holes in bottom of handle with the two (2) holes in bottom of door. Do not tighten the set screw yet.
2Install the two (2) screws into the bottom of the handle.
6
