Frigidaire 242108500 handle installation, Frigidaire Professional, Frigidaire Gallery,  Note

handle installation

CAUTION

Wear gloves and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models).

IMPORTANT

To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles.

Frigidaire Professional®

Freezer Upper End Cap Refrigerator Upper End Cap

1.	Remove handles from cartoning and
	any other protective packaging.
2.	Position freezer handle end caps over
	upper and lower preinstalled shoulder
	bolts (A) that are fastened into door,
	ensuring the holes for the set screws
	are facing towards the refrigerator
	door.
3.	While holding handle firmly against
	door, fasten upper and lower allen set
	screws (B) with supplied allen wrench.

Freezer Lower End Cap

Refrigerator Lower End Cap

4. Repeat steps 2 and 3 to install

refrigerator handle. Ensure the holes

for the set screws are facing towards

the freezer door.

NOTE

All set screws should be tightened and sub-flush (allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and refrigerator doors with no gaps.

Frigidaire Gallery®

Freezer Upper End Cap Refrigerator Upper End Cap

Freezer Lower End Cap Refrigerator Lower End Cap

8