Oven Control Functions
READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN.For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
BAKE TIME PAD— Used to enter the length of the baking time.
CLOCK PAD— Used to set the time of day.
TIMER ON/OFF
PAD— Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also, TIMER ON/OFF pad is used to set the Continuous Bake feature.
UP and DOWN ARROW PADS— Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of day, clean time and minute timer.
FEATURE INDICATOR LIGHTS— These light to show which feature is in use.
BAKE
BROIL PAD— Used to select the variable broil function.
START TIME PAD— Used to set the desired start time for baking &
May be used with BAKE TIME to program a delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated.
CLEAR/OFF PAD— Used to clear any function previously entered except the time of day and minute timer. Press CLEAR/OFF to stop cooking. Also the CLEAR/OFF pad is used to activate oven door lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON & OFF when using the Bake feature & during preheat. This is normal & indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold 
. After 7 seconds,
the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press
and hold 
again for 7 seconds until the control beeps once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.Press 
. "—
2.Press and hold the 
until "HI" appears in the display.
3.Press and hold 
until °F or °C appears in the display.
4.Press the 
or 
to change °F to °C or °C to °F.
5.Press any control pad to return to normal operating mode.
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
NOTE: To turn the time of day display OFF or ON in the display press 
and hold for 15 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the display
is turned OFF the time of day will 
pad is touched.
7