Care & Cleaning

 

(Cleaning Chart)

 

 

 

 

 

 

 

Surfaces

How to Clean

 

 

 

 

Aluminum (Trim Pieces)

Use hot, soapy water and a cloth. Dry with a clean cloth. Do not scour or use all-purpose

& Vinyl

cleaners, ammonia, powdered cleaners or commercial oven cleaner. They can scratch

 

and discolor aluminum.

Painted and Plastic Parts,

Body Parts, Control Panel

and Decorative Trim

Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. DO NOT spray liquids directly on the control pad and display area. Do not use large amounts of water on the control panel

-excess water on the control area may cause damage to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or paper towels - they will damage the finish. Before cleaning the control panel, turn all controls to OFF.

Easy Care™ Stainless Steel (some models)

Oven Door, Control Panel and Decorative Trim

Your appliance finish is made with Easy Care™ Stainless Steel (some models). Clean the stainless with warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a soft clean cloth. DO NOT use ANY store bought cleaners like Stainless Steel cleaners or any other types of cleaners containing any abrasive, chlorides, chlorines or ammonia. It is recommended to use mild dish soap and water or a 50/50 solution of water and vinegar.

Porcelain Enamel,

Broiler Pan and Insert, Door Liner, Body Parts

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating. DO NOT use spray oven cleaners.

Oven Racks

Oven racks may be removed or left in the oven during the Self-Clean cycle for

 

cleaning. If removed, clean by using a mild, abrasive cleaner following manufacturer's

 

instructions. Rinse with clean water and dry.

If the racks are cleaned in the Self-Clean cycle, their color will turn slightly blue and the finish will be dull. After the Self-Clean cycle is complete, and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of salad oil (this will make the racks glide easier into the rack positions).

Oven Door

DO Hand

Clean Frame

DO Hand

Clean Door

DO NOT

Hand Clean

Oven Door

Gasket

Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may use a glass cleaner on the outside glass of the oven door. DO NOT immerse the door in water. DO NOT spray or allow water or the glass cleaner to enter the door vents. DO NOT use oven cleaners, cleaning powders or any harsh abrasive cleaning materials on the outside of the oven door.

DO NOT clean the oven door gasket. The oven door gasket is made of a woven material, on Self-Cleaning models, which is essential for a good seal. Care should be taken not to rub, damage or remove this gasket.

10

Page 10
Image 10
Frigidaire 318200943 Care & Cleaning, Easy Care Stainless Steel some models, Porcelain Enamel, Oven Racks, Oven Door