30" Electric Range Installation Instructions
2. Install Anti-Tip Bracket
IMPORTANT SAFETY WARNING
To reduce the risk of tipping of the range, the range must be secured to the floor by properly installed anti- tip bracket and screws packed with the range. These parts are located in a plastic bag in the oven. Failure to install the
adifferent location, the
For the bracket installation instructions, refer to the
3. Serial Plate
Information
The serial plate is located as shown below. See the serial plate for the following information:
A. Model, lot and serial number of range.
B. Kilowatt rating (power requirements).
C. Voltage ratings.
4.Electrical Connection Requirements
Plug the range cable (4 conductors) into a 4 conduc- tor range outlet. Outlet must be properly grounded and in accordance with the Canadian Electrical Code (CSA Standard (C22.1 Part 1
Figure 1
4 Conductors Range Cable
5. Leveling the Range
A. Install an oven rack in the center of the oven. B. Place a level on the rack (see Figure 2). Take 2
readings with the level placed diagonally in one direction and then the other. Level the range, if necessary, by adjusting the 4 leg levelers with a
wrench (see Figure 3).
Figure 2 |
Leg
Leveler
Raise
Lower
Figure 3
6. Checking Operation
Refer to the Use and Care Guide for operation. 
CAUTION Do not touch cooktop glass or elements.
They may be hot enough to burn you.
Before You Call for Service
Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.
2
