Frigidaire 318205325 important safety instructions Setting Oven controls

Setting OVEN controls

Setting the Clock

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash “12:00”.

To set the clock (example below for 1:30)

1.Press SET CLOCK.

2.Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display.

3.Press the CLOCK pad to accept the new time of day. If the CLOCK pad is not pressed, the timer will return automatically to the new time of day after 7 seconds.

Note: The clock cannot be changed during any bake, quick bake, timed bake, delayed time bake, clean cycle, quick clean or delayed clean cycle.

Changing between 12 or 24 hour time of day display

1.Press and hold the SET CLOCK pad for 7 seconds. After 7 seconds, “12Hr” or “24Hr” will appear in the display and the control will beep once.

2.Press the UP or DOWN ARROW pad to switch between the 12 and 24 hour time of day display. The display will show either “12Hr” or “24Hr”.

3.Wait 5 seconds or press the CANCEL pad to return to the time of day display.

4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

Oven light

The oven is equipped with oven lights. The oven lights will turn on automatically, when the oven door is opened.

The oven light may be turned on when the door is closed by using the oven light pad located on the control panel. The oven light key will toggle the lights at full intensity.

To toggle the Oven Lights ON and OFF:

1.Press OVEN LIGHT .

The interior oven lights are covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To change the interior oven lights, see “Changing the oven light” in the Care & Cleaning section.

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER pad control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 12 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 12 Hour Energy Saving features

1.Press and hold TIMER for 7 seconds.

After 7 seconds “--hr” or “12hr” will appear in the display and the control will beep once.

2.Press the UP or DOWN ARROW pad to switch between the 12 Hour Energy Saving and continuous bake features.

Note: “12hr” in the display indicates the control is set for the 12 Hour Energy Saving mode and “--hr”indicates the control is set for the Continuous Bake feature.

3.Wait 5 seconds to accept the changes or press CANCEL pad to reject the changes.

Setting Temperature Display — Fahrenheit or Celsius:

The BROIL and ARROW pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.

2.Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.

3.Wait 5 seconds to accept the changes or press CANCEL pad to reject the changes.

8