i. t,:ON I1.O \D \\'-'_SHER
_'_( ',Z'_'OIIRF FOil RFPI_ kC|NG IHE BO()] continued
ILLUSTRATION #5ILLUSTRATION # 6
"! Once the groove mthe boot is lubed _,Athsoap, locate the arrow as shown m figure #6 that
is located on the top of the boot (located to the right of the extrusion that slips over the duct)
Yhts arrow must point up when the boot tsinstalled
'_',hththe boot m one hand and the other hand spreading the hp and groove (on the boot near
the arro_ ), tbrce the lip rata the groove behmd the hp at the top ofthe opening on thetub
shell (see figure #7)
ILLUSTRATION #7 ILLUSTRATION # 8
\Vlth one hand holding the boot so it does not shp off", use the other hand to continue
spreading the hp and groove of the boot f'urther to the right In thin way you continue this
acuon 560 degrees around untd the boot _smounted onto the front shell (see # 8)
_'otH Iinget_ x_ll take abeatm_ wh_le you do th_s and may become quite t_red Don_t g_ve up
I_est one hand al atlnle *fneeded _,_.hatcx'ct van do, do not remove both hand_ until the
t_o,_l _, ,m (unlc',_, you want itt_ fall ,_tl',md then votl get tostart over with II)
t [ '11,I[',