Solutions to Common Dishwashing Problems
(continued)
Dishwasher Leaks
•Use only fresh detergent designed for automatic dishwashers. Measure detergent carefully. Try a different brand.
•Spilled rinse aid can cause foam and lead to overflowing. Wipe up any spills with a damp cloth.
•Check to see that dishwasher is level. (See Installation Instructions.)
Normal Sounds You Will Hear
•Normal sounds include water fill, water circulation and motor sounds.
•There is a noticeable change in sound when the wash action switches between the lower and middle spray arm. This is normal since each spray arm has its own sound.
•It is normal for dishwasher to pause (no sound) when the wash action is switching between the lower and middle spray arms.
Dishwasher Won’t Run
•Check to see if circuit breaker is tripped or if a fuse is blown.
•Make sure water supply is turned on.
•Check to see if cycle is set correctly. (See Operating Instructions.)
•Is dishwasher set for delay start option?
•Make sure door is closed and latched.
Vapor at Vent
•Water vapor escapes from the vent when the dishwasher goes into the drying part of cycle. This is normal.
Dishwasher Won’t Fill
•Is water supply turned on?
•Check your home circuit breaker or fuse box.
•Check inlet hose for a kink.
•Does overfill protector move up and down freely? (See Overfill Protector section.)
Dishwasher Has an Odor
•Soiled dishes left in dishwasher too long can create an odor. Rinse dishes if not running dishwasher at once.
•There will be a “new” smell when first installed. This is normal.
•Check to see if unit is draining properly. (See Dishwasher Does Not Drain Properly.)
Stains on Tub Interior
•Washing large amounts of dishware with tomato based soil can cause a pink/orange appearance. This will not affect performance and will gradually fade over time.
Dishwasher Does Not Drain Properly
•If unit is hooked up to a food waste disposer, make sure the disposer is empty.
•Check to see if the knockout plug has been removed from inside the food waste disposer inlet.
•Check to see if drain hose is kinked.
•Make sure cycle is complete, not in a pause.
Water in Bottom of Tub
•Water left in bottom of tub after cycle is complete is not normal. If water remains in the bottom of the tub, dishwasher may not be draining properly. (See Dishwasher Does Not Drain Properly.)
Removing Spots and Film
Hard water can cause lime deposit buildup on the interior of the dishwasher. Dishes and glasses may also get spots and film for a number of reasons. (See Glassware/Flatware Spotted or Cloudy section.) To remove buildup, spots and film, clean using the following instructions:
1.Load clean dishes and glasses in normal manner. Do not load any metal utensils or silverware.
2.Do not add detergent.
3.Select the POTS & PANS cycle. Close and latch door.
4.Allow dishwasher to run for 25 minutes to reach the main wash portion of cycle.
5.Unlatch and open door and pour 2 cups of white vinegar into the bottom of dishwasher.
6.Close and latch door and allow cycle to finish. Note: If these conditions persist, a home water softener should be considered.
To customize your dishwasher to match your cabinets:
•You will need a trim kit.
•See Step 10 of Installation Instructions that came with your dishwasher for more information.
14
