Frigidaire FAQE7072LN Wrinkle Release, Line Dry, Delay Start, Chime Press & Hold on some models

Cycle Options, continued

Wrinkle Release

Select Wrinkle Release if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When Chime is selected, a beep will be heard periodically. The load may be removed any time during Wrinkle Release.

Line Dry

Select this option to simulate hanging your laundry in a summer breeze combined with the wrinkle-releasing benefits of tumble action. Since drying times are calculated with the dryer’s automatic moisture sensors and heat is radically reduced or eliminated, cycle time will be lengthened. As a result, depending on moisture content of load, overall energy consumption decreases. Available on Mixed Load (on select models), Normal, Casual, Jeans (on select models), and Delicates.

Delay Start

Press Delay Start to select a drying time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you select Start.

NOTE

While counting down during Delay Start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness.

Chime (Press & Hold on some models)

A signal will sound at the end of the cycle (and periodically during Wrinkle Release) if this option is selected.

Anti Static (on select models)

The Anti Static option injects steam into the clothing just before cycle completion to reduce static.

Shrink Guard (on select models)

Select Shrink Guard to lower the initial drying temperature to protect fabrics from overdrying.

Control Lock

To lock the controls between cycles, press and hold the Control Lock button for 5 seconds. Repeat to unlock the controls when you are ready to operate the dryer. Use this feature to reduce the likelihood of accidental operation by children.

OPERATING INSTRUCTIONS

ultra capacity

		wrinkle
sanitize	max	release
high	high	line
		dry
normal	normal	delay
low	low	start
air dry	damp	chime
		shrink
		guard
		control
		lock

ready steam system

			wrinkle
sanitize	max	90	release
high	high	75	line
			dry
normal	normal	60	delay
low	low	30	start
			add
air dry	damp	touch
			steam
		up	anti

static

control lock

ready steam system

			wrinkle
sanitize	max	90	release
high	high	75	line chime
			dry
normal	normal	60	delay
low	low	30	start
			shrink
air dry	damp	touch
			guard
		up	anti

static

control lock

13