INSTALLATION REQUIREMENTS

Exhaust system requirements, continued

Install male fittings in correct direction:

CORRECTINCORRECT

In installations where the exhaust system is not described in the charts, the following method must be used to determine if the exhaust system is acceptable:

1Connect an inclined or digital manometer between the dryer and the point the exhaust connects to the dryer.

2Set the dryer timer and temperature to air fluff (cool down) and start the dryer.

3Read the measurement on the manometer.

4The system back pressure MUST NOT be higher than 0.75 inches of water column. If the system back pressure is less than 0.75 inches of water column, the system is acceptable. If the manometer reading is higher than .075 inches of water column, the system is too restrictive and the installation is unacceptable.

Although vertical orientation of the exhaust system is acceptable, certain extenuating circumstances could affect the performance of the dryer:

•Only the rigid metal duct work should be used.

•Venting vertically through a roof may expose the exhaust system to down drafts causing an increase in vent restriction.

•Running the exhaust system through an uninsulated area may cause condensation and faster accumulation of lint.

•Compression or crimping of the exhaust system will cause an increase in vent restriction.

•The exhaust system should be inspected and cleaned a minimum of every 18 months with normal usage. The more the dryer is used, the more often you should check the exhaust system and vent hood for proper operation.

Exhaust direction

Directional exhausting can be accomplished by installing a quick-turn 90° dryer vent elbow directly to exhaust outlet of dryer. Dryer vent elbows are available through your local parts distributor or hardware store.

See also CLEARANCE REQUIREMENTS on the next page.

NOTE

Use of 90° quick-turn elbow required to meet minimum installation depth of free-standing dryer:

•Straight back venting allows for 0” (0 cm) installation.

•Venting right with 90° elbow allows for 0.75” (2 cm) installation.

•Venting downward with 90° elbow allows for 0.75” (2 cm) installation.

•Venting left with short, straight adapter and 90° elbow allows for 3.75” (9.5 cm) installation.

•Venting upward with short, straight adapter and 90° elbow allows for 4” (10.5 cm) installation.

8

Page 7 Page 9
Page 8
Image 8
Frigidaire FASE7021NW, FASE7073NW, FASE7074NA, FASE7073NA, FASE7073NR important safety instructions Exhaust direction
Page 7 Page 9

FASE7021NW, FASE7073NW, FASE7073NA, FASE7073NR, FASE7074NA specifications

The Frigidaire FASE7074NA, FASE7073NR, FASE7073NA, FASE7073NW, and FASE7021NW represent a new generation of washers and dryers designed to deliver optimum efficiency and performance for modern households. Known for their sleek designs and advanced technologies, these appliances cater to various laundry needs while ensuring convenience and reliability.

One of the main features across these models is their impressive capacity. The FASE7074NA is specifically designed to handle larger loads, making it ideal for families. With a capacity of around 7.4 cubic feet, it allows you to wash more clothes in a single load, saving time and energy. Similarly, the other models come equipped with varying capacities to accommodate diverse laundry needs.

These Frigidaire models incorporate advanced washing technologies to enhance cleaning performance. The Adaptive Wash Technology adjusts the wash cycle based on the load size and fabric type, ensuring that each load is treated with the appropriate level of care. This results in cleaner clothes and optimized energy use. For drying, the models feature Sensor Dry technology, which automatically detects moisture levels and adjusts the drying time accordingly. This not only protects your garments from over-drying but also conserves energy.

Energy efficiency is another hallmark of these Frigidaire appliances. Many of these models come with ENERGY STAR certification, guaranteeing that they meet stringent energy efficiency guidelines. This feature is crucial for consumers looking to reduce their environmental footprint and lower utility bills, as these machines are designed to use less water and electricity without compromising performance.

User-friendly features enhance the overall experience. The intuitive control panels present on the FASE7074NA and its counterparts allow for easy program selection, ensuring that even those new to laundry appliances can operate them with ease. Additionally, options such as steam cleaning, multiple wash cycles, and delay start functions provide versatility and convenience.

Durability is an essential characteristic of Frigidaire's products. Built with high-quality materials and components, these machines are designed to withstand the rigors of daily use, giving consumers peace of mind regarding their long-term investment.

In summary, the Frigidaire FASE7074NA, FASE7073NR, FASE7073NA, FASE7073NW, and FASE7021NW models boast a combination of advanced technologies, energy efficiency, and user-friendly features. They represent an ideal choice for households looking for reliable, efficient, and effective laundry solutions. With their sleek aesthetics and robust performance, these models are sure to meet the diverse needs of modern laundry rooms.
Top Page Image Contents