ELECTRICAL CONNECTION
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity Supply voltage is the same as that indicated on the appliance rating plate.
If the European plug is unsuitable for your sockets, the plug should be removed
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow: Earth
Blue:Neutral
Brown:Live
The wire coloured green and yellow must be connected to the terminal marked with the letter "E" or by the earth
symbol 
or coloured green and yellow.
The wire coloured blue must be connected to the terminal "N" or coloured black.
The wire coloured brown must be connected to the terminal marked "L" or coloured red.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
10
