
Dishwashers
FFBD2407L S / M / W/ B / Q 24" Built-In
Dishwasher Specifications
•Product Shipping Weight (approx.) – 64 Lbs.
•Voltage Rating – 120V / 60 Hz / 15 Amps (maximum 20 Amps if connected with disposer)
•Connected Load (kW Rating) @ 120 Volts = 1.44 kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @ 120V = 10 Amps
•Always consult local and national electric & plumbing codes. Meets requirements of ASSE
•Water Pressure – Hot water line to dishwasher must provide between 20 and 120 pounds per square inch (psi).
•Make sure location has right drain, water and electrical outlets to make connections.
•Keep back free of drain, water & electrical supply.
•Electrical and water supplies should enter cabinet opening on floor, or through back or side walls, as shown in shaded areas.
•Connections preferably located toward left side of dishwasher. Do not cross drain, water or electrical lines in front of motor, blower or frame.
•When installing adjacent to wall, cabinet or other obstruction that extends beyond front edge of unit, allow 2" minimum clearance between opened door and obstruction.
•When installing at end of cabinet line, sides must be fully enclosed.
•Do not install unit under a cooktop, damage will occur.
Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 •
Meets requirements of ASSE 1006
Specifications subject to change.
FFBD2407L 01/12 | © 2012 Electrolux Home Products, Inc. |