DOOR REMOVAL INSTRUCTIONS
Outils nécessaires: | ||
Tournevis à |
| |
tête Phillips™ |
| |
| or | |
Jeu de clés | Clé à | |
molette | ||
à douilles | ||
| ||
or |
| |
Clé |
| |
polygonale | ||
de 3/8" |
| |
Top Hinge | Top Hinge | |
Cover Front | Cover Rear | |
Screw | Screw | |
Top | Bottom | |
Hinge | ||
Screw | Hinge | |
| Screw | |
Getting through narrow spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors. Check first by measuring the entrance.
To prepare for removing the doors:
1Make sure the electrical power cord is unplugged from the wall outlet.
2Open both doors and remove the toe grille (as explained in the Installation Instructions that came with your appliance).
3Remove any food from the door shelves.
4Close the doors.
To remove the refrigerator top hinge cover:
1Remove the three screws from each cover over the top door hinges.
2Lift hinge cover straight up and off.
Rear Cover | Front Cover |
Screw | Screws |
Top
Hinge
Cover
Hinge
Screws
Top
Hinge
To remove the refrigerator door:
1Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.
2Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it aside.
7
