Frigidaire FFSS2614QP important safety instructions Handle Installation,  Note

HANDLE INSTALLATION

CAUTION

Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models).

IMPORTANT

To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles.

1Remove handles from carton and any other protective packaging.

2Position freezer handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the refrigerator door.

3While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench.

4Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes for the set screws are facing towards the freezer door.

NOTE

All set screws should be tightened and sub-flush (Allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and refrigerator doors with no gaps.

Ensure Handle Set Screws

are Facing Each Other

with Doors Closed

Frigidaire Professional®

Freezer Upper	Refrigerator Upper
End Cap	End Cap

Freezer Lower	Refrigerator Lower
End Cap	End Cap

Frigidaire Gallery®

Freezer Upper	Refrigerator Upper
End Cap	End Cap
Freezer Lower	Refrigerator Lower
End Cap	End Cap

9