DOOR REMOVAL/REVERSAL INSTRUCTIONS
7.Remove three screws on bottom hinge and anti- tip bracket (if equipped) with ⅜” socket wrench.
8.Remove toe grille support and screws (if equipped).
9.Install bottom hinge and
10. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.
11. Install toe grille support and screws on opposite side (if equipped).
12. Reverse door handles (see Handle Installation section).
13. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.
14. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole.
15. Tighten center hinge pin with adjustable wrench.
16. Remove cabinet and hinge hole plugs and move to opposite side.
17. Lower freezer door onto center hinge pin.
18. Close freezer door. Have an assistant lift up on opposite side of door while tightening screws to install top hinge.
19. There are two toe grille covers provided in your literature packet or already installed on toe grille; one for the right side and one for the left side. Install the appropriate cover over the opening on the side opposite the
NOTE
In case of future door reversals, save the toe grille cover not being used.
20. Reinstall toe grille with appropriate cover (some models).
21. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary.
WARNING
When reversing the door swing:
You MUST move the
Door Stop | Door |
Screw | Stop |
| Washer |
| Hinge |
| Pin |
| Bottom |
| Hinge |
| Screws |
| Toe |
| Grille |
OR
| Lower | |
| ||
Bracket |
| |
| ||
| Bracket | |
Toe |
| |
Grille |
| |
Support | A | |
Toe Grille Cover | ||
| ||
| Toe Grille | |
| Support | |
| Toe Grille | |
| Cover |
| |
Bracket | B |
8