Status Indicator Lights
PF……………… | Appears in window when |
| dishwasher is first |
| installed, or when power |
| has been interrupted. HI- |
| TEMP WASH and AIR |
| DRY indicator lights will |
| also flash. To clear, |
| touch START/CANCEL |
| pad. |
Number of delay start | |
| hours. Count down are in |
| hours. |
Cd……………… | Close dishwasher door. |
| The status indicator |
| lights will also flash to |
| indicate current cycle |
| status. |
MINUTES…...… | Number of minutes left in |
| cycle |
| longer than 99 minutes, |
| the 99 will stay on until |
| the time counts below |
| 99. |
Lo.......… | Appears in window when |
| the rinse aid is low and |
| needs to be refilled. |
OPERATING INSTRUCTIONS
The Washing Light comes on at the beginning of cycle and remains on until end of cycle.
When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished and remain on for 30 seconds after the door is opened. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted or if incoming water temperture is below 120oF.
The CLEAN light will come on at the end of the cycle. When the door is opened at end of cycle and remain on for 30 seconds after door is opened.
In the unlikely event the dishwasher malfunctions, the indicator may display one of the following codes "Er", or "CE". If one of these codes are displayed contact the
Frigidaire Customer Care Center at
service technician, if needed.
NOTE
The wash cycle time could suddenly increase or drop several minutes. This means the Smart Sensor has checked the soil level and determined if additional water
fills are needed or if water fills can be deleted.
7
